I attended the Meguiar’s Motorex 2014 car expo today and I must say I was impressed by the amount of quality builds on display. Although all very centred towards the muscle car V8 types there were also a few exotics on display. I didn’t get to see any hot hatches (I probably didn’t try very hard to find them thou) but there were a few Japanese imports. Overall a good show and an impressive selection of cars, but I was disappointed that there were not more customised hot hatches on display. The only ones were in the audio section with massive sound systems sticking out of the boot and in the paint / designer wrap display part of the expo. Below are some pictures of cars that stood out for me. I tried to take different pictures of cars on display, I didn’t see the point of taking untold pictures of Commodores or classic Fords as they were in abundance. The ones that stood out for me were the unique cars that you don’t get to see too often.
This Studebaker was excellent, I like the lines on this classic, the unique curved nose was a standout for me, it looks so much like a beak of a hawk. Excellent lines, excellent paint and so low.
This beasted out 69 Toyota Corolla was so cool, I wish there were more of these types of cars being done up, but I do live in Melbourne where the only 2 brands that matter to the majority of car enthusiasts are Ford and Holden.
Another classic, this one was left raw with no paint. Very cool.
The cleanest engine bay I have ever seen
A couple of cool modern Jap cars
What cars? Who cares about cars?
A fully sick Capella
And I got to meet Karen from RPM Jewellery, a talented lady with loads of great jewellery on display, can’t wait to get my Opel ring.
It’s been a long time between write ups but I have had so much going on that I have spent so little time on the car. I was also unemployed for a month which was a bit of a stress but I finally found a new job which was such a relief when you have bills and a family to take care of. It kinda left no time for the car. I also got a company car – a crappy Ford Falcon station wagon so I have hardly driven the Astra in months. It’s a good thing I guess as I have not bought petrol for weeks now, the company car came with a fuel card so I’ve been driving that petrol guzzling jalopy around everywhere – Thems the perks.
I have been training more now that I am running my own school – that has been taking up a lot of my time as well. I am really enjoying training others in the Kung Fu style I have dedicated my spare time to for the last 15 years. I get a lot of pleasure in seeing people improve with time and having the same passion for Choy Lay Fut as I do. I have a few students who are really appreciating the hard training I dish out to them every week. If they keep coming back I must be doing something right.
I made a new website for the school, you can go visit it here
and you can visit the google+ page here
If you are in the west of Melbourne and want to learn a traditional martial arts style come down to my school and join us. The first lesson is free so there is no excuse..
I am intending to visit MotorEX this year as it is going to be held in Melbourne – I can’t wait to see all the customized cars to admire the amount of time and work people put into their machines. I will also get a chance to visit my favourite car related jewellery designer “RPM Jewellery“, I’ll be finally picking up one of those tyre rings I wrote about almost 2 years ago.
Hopefully this is just the start of me writing again, there’s just not enough time in the day.
Its been a long time since I last posted (six months in fact) and in that time so much has happened in my life that I have had hardly any time to do things to the Astra. Firstly I did my annual pilgrimage to Hong Kong and the fellas won all their bouts at the Choy Lay Fut International Kung Fu tournament. I also did some car spotting in Hong Kong – I must say I am always impressed by the calibre of hot looking cars there. I spotted this nice Ferarri parked in the backstreets of Mongkok, it was looking very out of place.
I also spotted a pair of Mercs that looked like it had a Brabus makeover. The rims were looking very sweet, apart from that the cars were pretty much stock looking – I didn’t really have a look under the hood so I can’t really say what had been done to them.
Then there was this thing… It looked like it was on stilts, very ugly.
I had a great time in HK once again but that wasn’t all that happened. I also became a dad for the second time this year with the birth of my son in November. Xavier has been keeping my wife and I up all night for over a month now and I don’t think it is going to stop anytime soon. Here he is with big sister Isabella.
I’ve also been looking for a new job, I feel that after ten years in one place it’s time for a seachange, so the Astra has been left on the side for quite some time. I did buy some small bits for it thou:
Some chrome air vents.
A new pair of Heko wind deflectors from Poland as well as tinting the windows (I got it done by a pro and was worth every cent).
I also did some more colour coding.
Stay tuned as in the next few days I wil be carbon fibre wrapping the hood and putting in those Audi style DRL lights I bought a few months ago. Once again Happy New Year everyone.
I have not had any time up until now to do things to my car – so with the 2 weeks of holiday time I have I am going to try and do as much to the car as possible. There’s a big list of things to do which hopefully should not take more than a few days. Today I am going to change the rocker cover gasket, change the rad pipes to the silicone ones I bought months ago and re-fit my air intake pipe with a new bellows I bought (which should make it sit better).
The first thing I did today was the rocker cover gasket, after removing the engine cover I unplugged the coilpack and removed it. It was then an easy process of removing all the pipes and screws that held the rocker in place.
That was the easy part – the hard part was actually prying the rocker cover loose, it felt like it had been welded on, I sprayed some WD 40 on the seal and then tried to cut the seal with a blade, after some effort I got the cover off, needless to say that took a good 30 minutes trying to get the rocker off. So then I proceeded to give the cover a good degrease and clean.
After the clean I decided to re-spray the cover just because I had some left over high heat spray, so bang it was done.
While the cover was drying I thought I would do the rad hoses as well as the new bellows I got for the air intake feed, I drained the rad and ripped out the bottom and top hoses, the top hose was no problem but the bottom hose was a bit tricky as there is not much space to work with. I had to cut the old rubber hose as it was well and truly stuck to the pipe and then proceeded with replacing the hoses with silicone ones. I think it looks quite good.
I then placed the new gasket into the rocker cover with some silicone sealant and waited for it to dry. In the meantime I started working on the air intake bellows, no pictures of that as it wasn’t that interesting. Anyways I let about an hour go by before I placed the rocker cover back in place and bolted it all down. Hopefully this will stop the engine from leaking oil onto my spark plugs.
For anyone attempting to change their own rocker cover gasket I would suggest that you try and use a blade to cut the seal away before carefully lifting the cover off. It may take a while but it can be done if you persevere. Also give the cover a good clean with degreaser especially around where the gasket sits. Clean all the oil out and put a small amount of gasket sealer around there so that it will hold the new gasket in place while you are trying to mount it back on the engine block. It’s all pretty straightforward stuff but if you do the simple things it will save you a headache in the long run. Changing the rad hoses was easy but make sure you drain the rad first or else you will have coolant all over the car. Also remove the bottom hose first because if there is any leftover fluid it is better it come out from the bottom rather than the top hose where it will go all over the engine. All very common sense stuff really.
Tomorrow I will be doing the brakes and if time permits putting on the strut bar I bought ages ago – stay tuned for more pictures.
Well the first of what I ordered a few weeks ago has just arrived, The Armster Armrest I ordered from the UK arrived in super quick time – excellent delivery service from all the way in the UK. I can’t recommend this seller highly enough – www.teamtorquesteer.co.uk. The communication was excellent, the person I dealt with kept in contact and informed me of everything that was happening with the order. I was able to track the parcel all the way from the time it left the UK to the time it got delivered to me. I have no hesitation in going back to this company to buy more stuff in the future. Excitedly I opened the parcel – I was surprised to see how small it was, I imagined it to be bigger.
It took about 15 minutes to fit it onto the console of my car, I didn’t even need to drill holes, the self tapping screws supplied just dug into the plastic and I was able to fit the whole thing onto the car with just a screwdriver.
It covers the hand brake a little bit but I am still able to use the hand brake without having to move the armrest into the up position. It doesn’t really bother me at all and now I have somewhere to rest my arm.. lol. Also the extra storage space is a blessing as the Astra is not well known for it’s ample storage spaces up front. I just have to do something about a cup holder now. The build quality of the armrest is very good, the colour of the plastic is almost the same as the console and the black leather (actually I think it’s more like pleather) fits in well with the rest of the interior (Now I will have to look for leather seats for my car…. it never ends does it??). I am very happy with this purchase, hopefully the rest of the stuff I have ordered will arrive soon. Stay tuned..
I finally got my finances back in check so I went on a mad buying spree for the car. Firstly I got new Brake Rotors for the front and back. I will get some pads later on, I will probably get those at the local auto store as I can get a discount at one of them.
Secondly, I also splurged on an Armster Armrest from the UK.
I don’t know why the car did not have one in the first place so I decided to get more storage space and give myself some small creature comfort at the same time.
Thirdly, I found a few leaks in the car, the most worrying one was the bottom radiator hose which began weeping after 4 days of extremely hot weather, I have tightened the jubilee clip which seemed to have stopped it for now but I decided to get some new hoses anyways, so I bought some silicone hoses from Roose Motorsport.
As soon as the parts arrive I can get on with the job of giving the radiator a good flush, replace both top and bottom hoses and also fixing a slight leak with the rocker cover gasket. When I changed the sparks the other week I noticed that 3 out of 4 of the sparks had a film of oil on them, this is clearly an indication that the gasket on the rocker cover is at it’s end. So off to LMF Vauxhall I went and ordered a new rocker cover gasket as well as a few other things.
Well it seems I will be busy doing car things in the next few weeks. I really enjoy doing things myself as I find it not only a learning experience but a rewarding one. You get to learn about cars as well as be safe in the knowledge that you have done the repairs and/or servicing yourself and not rely on a mechanic who can say they have done this and that when they have not, and also know that the parts you have used be what you wanted to use.
Stay tuned for more pictures as the parts get to me.
The holiday break is nearly over for me – I can say that I spent it quite productively, I got a heap of small jobs done to my car and I am happy enough with the way the car is shaping up. Over the last few weeks I have spent a few days here and there tinkering with the aesthetics of the car, all the things I wanted to do have been accomplished. I’m pretty happy with all the jobs I have done, however small they may be it has made a difference to me. It has made my car a bit different to the 100s of others out on the road and to me that is what counts. Along the way I have learnt a few new things, and I’ve also learnt to do it right the first time around (or else face the consequence of having to do it again).
So for now the front spoiler is done, I also replaced the washer jets with Insignia washer jets (the ones that fans the water out as opposed to the stock Astra ones which shoots out two streams of water). I also finished spraying the rest of the centre console today so now I have a colour matching centre console with the rest of the centre pieces and given the car a good cut and polish.
Now to save up money for the real things I have to do – which means having to go back to the grind of work. There are a few more things I would like to do to the car – actually I can’t really say that, I’m always finding other things to do to the car… lol. But the most important thing would be to do the brake rotors and pads very soon.